Charging an iPhone 6 with a milliamp adapter can be a challenge. The adapter must be able to provide enough current to charge the iPhone, but it also needs to be compatible with the charger. Here are some tips on how to charge an iPhone 6 with a milliamp adapter:

  1. Make sure the charger is compatible with the iPhone. Check the product description to see if it is compatible with the iPhone 6. If not, find a compatible charger on Amazon or other online retailers.
  2. Connect the power cord of the charger to one end of the iPhone’s power cord and the other end of the milliamp adapter’s power cord.
  3. Place your iPhone in charging mode by pressing and holding down on its side until it starts blinking green (this indicates that it is in charging mode). The phone will now show its battery level in terms of percentage (100% means full). To continue charging, hold down on its side until it starts blinking red (this indicates that it is in standby mode). The phone will now show its battery level in terms of watt hours (1 watt hour = 1000 Joules). To continue charging, hold down on its side until it starts blinking green (this indicates that it is in charging mode). The phone will now show its battery level in terms of percentage (100% means full). To continuecharging, hold down on its side until it starts blinking red (this indicates that it is in standby mode).
  4. Plug into an outlet and wait for your phone to charge completely before using it again.